Thursday 26 May 2016

solar panel quality parameter

Solar module made by major six component.

1 Solar cell
2 EVA 
3 Glass
4 back sheet
5 Aluminium frame 

We look at one by one by one  quality parameter 

Solar cell.

A solar cell is silicn semiconductor material which convert light into electricity.  In the process of silicon to ignot to solar wafer to solar cell to solar module.
Its look Like below 




In the process of Solar cell we got solar cell grade like A Grade Solar cell B grade Solar cell and C grade solar cell.  by define solar cell grade we define efficiency of solar cell capacity to covert Light to electricity. particular grade define mA current per cm area.

EVA

EVA is sandwich layer between Solar cell. the quality of the define Solar module Life. law quality EVA use module power degradation.




 Back sheet

It is back portion of the Solar module. It help the module strength and durability.
 


Wednesday 25 May 2016

solar led street light


Solar LED Street Light

www.amrutenergy.com
Benefits
Ø  Significant cost savings in avoiding to lay down electrical wires, distribution points, employing labor and doing away with digging hassles
Ø  High durability of solar panels and LEDs. Both solar panels and LEDs last for more than 10 years. In comparison, the conventional sodium and CFL lamps typically require replacement at least once every year
Ø  Close to a month’s time saved in newly constructed places as a result of easy installation  (feedback from builders)
Ø  Zero electricity cost
Ø  80% depreciation benefits
Ø  Environment friendly and easy disposal due to absence of harmful substances like mercury and lead
Ø  Less heat dissipation
Ø  Higher color temperature of light (purer form of light)
Ø  Carbon Credits and subsidies may be availed for large installations
Ø  Cleaner and Greener environment to breathe!



Solar LED Street Light Specification 
LED driver + solar charge controller
 Common circuit board which supports 6w to 42w solar LED street-light
 On board provision for varying output current and wattage
 On board provision for late night dimming mode
 LED driver type: Micro-processer controlled dual PWM DC-DC buck driver
 Efficiency:
o Minimum efficiency during full cycle: 90.62%
o Maximum efficiency during full cycle: 94.80%
Charge controller:
o Optimized three stage battery charge monitoring algorithm
o 10 ampere charging current capacity
o Battery low, load disconnect voltage: 10.50V
o Battery full, charging cut-off : 14.50V
 Protections:
o Short circuit protection
o Battery over charge protection
o Battery Deep discharge protection
o Solar panel reverse voltage polarity protection
o Battery reverse voltage polarity protection
o Software watch-dog for LED over current protection
LED status indications:
o RED continuous on: Battery low(battery voltage less than 10.5V)
o GREEN continuous on: Charging on
o GREEN blink: Battery full charge cut-off
 Dusk to Dawn functionality
 PCB dimension: 81mm x 61 mm
 We may provide GSM, Radio frequency(867MHz) or infrared connectivity to our lighting modules
for dimming/on-off/centralized control